Handlebar end titanium color 2-piece set (M1000R R1300GS R12)
Anodized (blue) specification

Feel the vibration-damping effect of titanium on your skin.

The numbness that remains in your hands even after getting off the bike can become quite painful if you ride for a long time.
If only we could reduce that numbness even a little...
Easy installation, just sandwich it between the handlebar and the bar end.
It's a small part, but it reduces the vibration transmitted to the handlebar due to engine resonance.

Bar end anti-rotation pins are also included for each model.

●Compatibility

BMW M1000R (2023-), M1000XR (2024-)
BMW R12, R12nineT
BMW R1300GS, R1300GSA

M1000R genuine bar end mirror compatible with part number (5166 7107 617).
※(7722 1697 428) is not compatible.

Remove the genuine bar end anti-rotation pin and replace it with the included pin.
・φ2.5/L12 pin for M1000R, M1000XR
・φ3/L12 enamel screw for R12/R12nineT
・φ3/L15 pin for R1300GS/GSA

Caution

※This product is priced as a set of 2.
※The effect varies depending on the individual differences of the vehicle and the parts installed.
※The outer diameter of the product is φ29.5. (For convenience, the product name is φ30.)
※The inner diameter of the product is φ12. The thickness is 3mm.
※For AELLA bar ends, please use it by sandwiching it between the brass weight and the bar end.
*Depending on the vehicle and product to be installed, the screw length for securing the bar end may be insufficient by the thickness of the spacer. Please be sure to check before installation.
*It may not be possible to install with aftermarket products. Please check the inner diameter and shape of the handlebar end before purchasing.

*When installing, if the accelerator grip is outside the handlebar end, it may come into contact with the AT-W0013 and the accelerator may not return. Please check that the grip itself has not stretched outward due to long-term use.