Brake lever guard & bar end slider
(Compatible with inner diameter 14mm to 15mm)
This product, which prevents the front tires from locking when the brakes are activated in the event of contact with another vehicle,
protects the rider not only on the circuit but also in the event of an accident on public roads. It is an important part to do.
The end of the handlebar has a slider function, and in the unlikely event of a fall, it is possible to repair by replacing only the slider part.
By adopting a brass material on the left side, it is used as a handlebar weight and has the effect of reducing vibration.
By making the bar end part a repairable resin, it has a slider function.
It can be easily installed just by removing the bar end.
It is beautifully finished by AELLA's design and processing,
not only as a functional part but also as a highly fashionable part that enhances the custom image of your car.
Two types of offset collars (6mm/12mm) are included to avoid interference between the lever and the lever guard.
Can be used together with our damping bar end titanium collar: (AT-W0007).
Handle inside diameter
14mm to 15mm: AE-15005
16mm to 17mm: AE-15006
18mm to 19mm: AE-15007
>For customers who have our bar end sliders
We also sell only the lever guard part. AE-15008 for 14mm to 15mm
AE-15009 for 16mm to 17mm
AE-15010 for 18mm to 19mm
It has a piece shape. Each can be replaced when damaged.
■Compatible models (confirmed by us)
*Compatible with genuine taper handlebars and AELLA aluminum taper handlebars.
DIAVEL, DIAVEL1260, XDIAVEL
STREETFIGHTER, STREETFIGHTER V4, STREETFIGHTER V2
*This product is suitable for pipe-shaped steering wheels, so it is not suitable for S1000RR and other shapes that are tightened with bolts.
*In the case of Multistrada 1200, it is limited to the use of AELLA aluminum taper handlebars.
*Compatible with genuine aluminum separate handlebars.
*Compatible with AELLA aluminum separate handlebars.
*Pole smart/SPORT1000/SPORT1000S genuine steering wheels are not compatible.
*Compatible with all derived models such as S and R unless otherwise stated.
*It is possible to install the Panigale, but please check the fit as it is a screw type. (Excluding V4)
*In the case of SPORT1000, it cannot be used with genuine bar end mirrors.
*Multistrada1200, SCRAMBLER, and Xdiavel are compatible with genuine handlebars.
1 Base ×1
3 Color 12mm×1
4 Collar 6mm×1pc
6 Anchor nut×1pc
7 Slider base×1pc
9 Washer x 2
10 Shaft x 1
11 Cap bolt M6 x 65 x 1
12 Cap bolt M6 x 50 x 2
13 M6 washer ×2
14 Ultra-low head bolt M5×6×2
15 Parallel pins 2×8×4
16 Parallel pins 2×10×4
17 Parallel pins 2×15×4
18 Parallel pins 2×18×4
19 Parallel pins 2×20×4
20 Parallel pins 2×22×4
21 AELLA etching plate×2 sheets