Brake lever guard & bar end slider
(Compatible with inner diameter 16mm to 17mm)
This product, which prevents the front tires from locking when the brakes are activated in the event of contact with another vehicle,
protects the rider not only on the circuit but also in the event of an accident on public roads. It is an important part to do.
The end of the handlebar has a slider function, and in the unlikely event of a fall, it is possible to repair by replacing only the slider part.
By adopting a brass material on the left side, it is used as a handlebar weight and has the effect of reducing vibration.
By making the bar end part a repairable resin, it has a slider function.
It can be easily installed just by removing the bar end.
It is beautifully finished by AELLA's design and processing,
not only as a functional part but also as a highly fashionable part that enhances the custom image of your car.
Two types of offset collars (6mm/12mm) are included to avoid interference between the lever and the lever guard.
Can be used together with our damping bar end titanium collar: (AT-W0007).
Handle inside diameter
14mm to 15mm: AE-15005
16mm to 17mm: AE-15006
18mm to 19mm: AE-15007
>For customers who have our bar end sliders
We also sell only the lever guard part. AE-15008 for 14mm to 15mm
AE-15009 for 16mm to 17mm
AE-15010 for 18mm to 19mm
It has a piece shape. Each can be replaced when damaged.
■Compatible models (confirmed by us)
Multistrada 1200 (without knuckle guard)
Scrambler 800/Sixty2<br/ >GT/ MH
ST4/ ST3/ ST2
*This product is compatible with pipe-shaped steering wheels, so it is not compatible with S1000RR and other shapes that are tightened with bolts.
*Compatible with genuine aluminum separate handlebars.
*Compatible with AELLA aluminum separate handlebars.
(V2/959/899/1299/1199 have two types of inner diameters, so be sure to check before purchasing.)
*Compatible with all derived models such as S and R unless otherwise stated.
*It is possible to install the Panigale, but please check the fit as it is a screw type. (Excluding V4)
*In the case of SPORT1000, it cannot be used with genuine bar end mirrors.
*Multistrada1200, SCRAMBLER, and Xdiavel are compatible with genuine handlebars.
■ Product Details
1 Base x 1
2 Guard x 1
3 Color 12mm x 1
4 Color 6mm x 1
5 Anchor×1 pc
6 Anchor nut×1 pc
7 Slider base×1 pc
8 Slider×2 pcs
9 Washer× 2 pieces
10 Shaft×1 piece
11 Cap bolt M6×65×1 piece
12 Cap bolt M6×50×2 piece
13 M6 washer×2 pieces< br />14 Ultra low head bolt M5×6×2 pieces
15 Parallel pins 2×8×4 pieces
16 Parallel pins 2×10×4 pieces
17 Parallel pins 2×15× ;4
18 Parallel pins 2×18×4
19 Parallel pins 2×20×4
20 Parallel pins 2×22×4
21 AELLA etching plate ×2 pieces